DeutschHigh Power
Customized high performance power supplies for HIGHCURRENT and HIGHVOLTAGE
We offer high performance power supplies for currents up to 10.000 Ampere and voltages up to 300.000 Volt.
The power supplies are tuned to your requirements and so they insure the optimal interaction together with your application.
PTN3p / PTNhp - Series
Double-stabilised linear control low-voltage power supplies
- Double-stabilised linear control power supply with high precision
- output current up to 5.000 Ampere
- output voltage up to 600 Volt
(for higher voltage see PHN series) - residual ripple < 0,01% pp, (up to 0,001% as PTNhp)
- stability < 0,01% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage
and current, analogue displays on request - analog interface
- digital interface avalible as option
- ustained short-circuit resistant
- sense-connection
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PTN3p-datasheet (PDF) PTNer - Series
High Performance Power Supplies with Active Energy Recovery
- Robust power unit based on the PTN3p series with "Heinzinger Energy Recovery"
- Integrated energy recovery that converts energy returning from the consumer back into network voltage and is fed back into the supply network
- Very good dynamic behaviour
- Minimal threshold between power units and energy recovery mode with intelligent detection of the operating mode of the consumer
- Comprehensive digital and analogue control methods
- Power unit function with integrated option "Battery characteristic curves" for recreating the behaviour of a battery
- Suited for non-stop operation, extremely reliable
- Modular design
- Galvanic separation of the consumer in energy recovery mode
- Power unit available in water-cooled version
PTNer-datasheet (PDF) PNY - Series
SCR controlled low voltage power supplies
- output current up to 10.000 Ampere
- output voltage up to 600 Volt
(for higher voltage see PHY series) - residual ripple < 0,1% pp,
- stability < 0,1% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage
and current, analogue displays on request - analog interface
- digital interface avalible as option
- ustained short-circuit resistant
- sense-connection
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PNY-datasheet (PDF) PHN / PHNhp - Series
Double stabilized linear controlled high voltage power supply
- output voltage up to 60.000 Volt
- output current up to 40 A
- residual ripple < 0,01% pp, (PHNhp up to 0,001%pp)
- stability < 0,01% over 8h (PHNhp 0,001%)
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage
and current, analogue displays on request - analog interface
- digital interface avalible as option
- external HV On/Off via stand-by input
- polarity reversal as option
- sustained short-circuit resistant
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PHN/PHNhp-datasheet (PDF) PHY - Series
SCR controlled high voltage power supply
- output voltage up to 60.000 Volt
- output current up to 40 A
- residual ripple < 0,1% pp
- stability < 0,1% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage
and current, analogue displays on request - analog interface
- digital interface avalible as option
- external HV On/Off via stand-by input
- polarity reversal as option
- sustained short-circuit resistant
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PHY-datasheet (PDF) PCU - Series
High Precision Power Supplies for Magnet Applications
- Extremly precise power supply for magnets
- Modular system, parallel operation to increase output power possible
- Zero-Voltage-Switching Technology
- Maximum accuracy and stability (<10ppm/8h)
- Temperature coefficient <10ppm
- Optimum ratio between power density/accuracy
- DCCT current measurement
- Programmable current ramp function
- 2-part LCD display with text indicator
- Analog (0...10V) and digital interface (RS422)
- Controller configuration/load balancing possible
- Last setting memory
- Air colling (optional water cooling)
- Triggereingang für Mess-Signal
- Trigger input for measurements signals
- Output short-circuit and open-circuit proof
- Pole-reversal unit for switching polarity optional
- Various voltage/current combinations
- Customer-specific variants
PCU-datasheet (PDF) 