DeutschHighest precision
The hp devices are just as all Heinzinger power units also robust and absolutely reliable power supplies for non-stop operation. And that with improved utmost precision and least residual ripple. Even as standard versions do the hp types have a residual ripple and stability in the <0.001 % range, the temperature coefficient also lies in this range for voltage and current stabilization. Devices with even better output data up to 0.0001 % can also be realised according to customer specifications.
Series overview
 PTNhp |
 PNChp |
 PHN/PHNhp |
 HNCE/HNCEhp |
PTNhp - Series
High precision double-stabilised linear control low-voltage power supplies
- Double-stabilised linear control power supply with highest precision
- output current up to 5.000 Ampere
- output voltage up to 600 Volt (for higher voltage see PHN series)
- residual ripple < 0,001% pp
- stability < 0,001% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage and current, 4.5digit displays on request
- analog interface
- digital interface avalible as option
- ustained short-circuit resistant
- sense-connection
PTNhp datasheet (PDF) PNChp-Series
High precision high voltage power supply
- switch mode HV power supply for high precision
- output voltage up to >300.000 Volt
- output current up to 10.000 mA
- residual ripple < 0,001% pp
- stability < 0,001% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage and current, 4.5 digit displays on request
- analog interface
- digital interface 16 bit avalible as option
- external HV On/Off via stand-by input
- polarity reversal as option
- sustained short-circuit resistant
- available for the most PNC and PNC3p types
PNChp datasheet (PDF) PHN / PHNhp - Series
Double stabilized linear controlled high voltage power supply
- output voltage up to 60.000 Volt
- output current up to 40 A
- residual ripple < 0,01% pp, (PHNhp up to 0,001%pp)
- stability < 0,01% over 8h (PHNhp 0,001%)
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage and current, analogue displays on request
- analog interface
- digital interface avalible as option
- external HV On/Off via stand-by input
- polarity reversal as option
- sustained short-circuit resistant
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PHN/PHNhp datasheet (PDF) HNCE- /HNCEhp- Series
High voltage module
- switch mode HV module
- input voltage 24V DC
- output power up to 12 Watt
- output voltage up to 20.000 Volt
- output current up to 30 mA
- residual ripple up to < 0,005% pp, type-dependent
- stability < 0,2% over 8h
- setting of output voltage via analog interface
- setting of output current via analog interface
- external On/Off via stand-by input
- analog interface
- sustained short-circuit resistant
HNCE- /HNCEhp datasheet (PDF)