PNChp series
Universal high voltage power supplies (high precision)
up to
400,000 V
Output voltage
up to
3,000 mA
Output current
up to
2,000 W
Power
up to
0.001 %
Precision
Design
benchtop, 19”-rack-mount
- Output voltage up to >400,000 V
- Lowest residual ripple and highest long-term stability up to 0.001 %
- Output power up to 2,000 W
- Suitable for resistive, inductive and capacitive loads
- HV ON/OFF via push button and interface
- ≥10 kV with sealed HV unit. They thus provide compact dimensions and long-term stability and are largely independent of environmental conditions
- Universal casing, use as desktop unit or as 19" rack mount
- Sustained short circuit proof
- Over voltage and over current protection
- Operation is possible as constant-voltage source (CV mode) or constant-current source (CCS)
- Setting of the output values through 10-turn potentiometers, separately for voltage and current
- Remotely controllable and extendable by means of an integrated analog 0…10 V interface for voltage and current setup as well as indication
- Customized versions possible on request
In reliable continuous use worldwide
Industrial customers and research institutions all over the world appreciate the reliability and functional safety of the PNChp high-voltage device series. These power supplies are used when reliability, long-term stability and high precision are required.
For numerous industries
Precision-controlled DC high and ultra-high voltages
Universal high-voltage power supply units are used wherever reliable high-voltage power supply with long-term stability is needed, which ideally are as independent as possible of their ambient conditions. Efficiency is also an important characteristic for high-voltage power suppy units. Efficiency refers to the ratio between the power entering and leaving the supply and is normally assessed at nominal input voltage and full load. High-voltage power supply units have a high level of…
For numerous industries
Precision-controlled DC high and ultra-high voltages
Universal high-voltage power supply units are used wherever reliable high-voltage power supply with long-term stability is needed, which ideally are as independent as possible of their ambient conditions. Efficiency is also an important characteristic for high-voltage power suppy units. Efficiency refers to the ratio between the power entering and leaving the supply and is normally assessed at nominal input voltage and full load. High-voltage power supply units have a high level of efficiency and therefore improve the lifespan of the equipment with reduced cooling requirements. It is worth remembering that the difference between the power entering the supply and the power leaving it is converted into heat. So the higher the efficiency for primary switched-mode power supply units, the lower the heat load on the components.
For universal use
Universal high-voltage power supply units in the PNChp series
These supplies are used when reliability and long-term stability are required. The semiconductor industry, for example, uses primary switched-mode universal high-voltage supplies from Heinzinger.
All PNC standard types for many applications:
- PNChp series, for highest, 10ppm, 0.001%
- PNC series for voltages up to 400 kV with powers up to 2 kW
- PNC3p series, for powers up to 6 kW
- PNCcap series, capacitor chargers of the highest precision
Downloads
Datasheets and downloads are available here
We look forward to receiving your inquiry
