up to 30,000 V
Output voltage
up to 500 mA
Output current
[Translate to English:] Labornetzgeräte für Hochspannung für mehr Leistung 60 W
Power
[Translate to English:] LNC - Labornetzgeräte für Hochspannung – Hohe Präzision 0.1 %
Precision
Highlights

Highlights

  • Output voltage up to 30,000 Volts
  • Output current up to 500 mA
  • Output power up to 60 Watts
  • Solid benchcase
  • Low ripple
  • Continuous short circuit proof
  • Preset-Function
  • Operation is possible as voltage or current source (CV-mode or CC-mode).
  • Suitable for resistive, inductive and capacitive loads
  • Digital 3½-digit display each for voltage and current
  • Setting of the output values through 10-turn potentiometers, separately for voltage and current
  • Remotely controllable and extendable by means of the integrated analog interface 0…10 V
[Translate to English:] Heinzinger - Vertrieb - Artur Gunko

Your personal contact
Artur Gunko

+49 80 31 - 24 58 - 63
info(at)heinzinger(dot)de

Laboratory power supplies for high voltages

The LNC series offers user-friendly DC-table-mounted supplies in a compact format

Accuracy is one of the most important characteristics for scientific work in the laboratory. This is the reason why Heinzinger developed laboratory power supplies for high voltages that meet the strict requirements posed by laboratories. The laboratory power supplies for high voltages of the LNC series are HV power supplies that supply a precise DC voltage. Depending on the specific model, they can supply up to 30 KV at a power of up to 60 W. The compact laboratory power supplies for high voltages stand out with their high control accuracy while maintaining a low residual ripple at the same time. This makes the power supplies of the LNC series particularly suitable for DC voltage in the range:

  •  Industrial sector
  • Automation technology
  • Medical technology
  • Laboratory applications

The laboratory power supplies for high voltages are available in output categories from 20 to 60 W. They can be ordered with positive or negative polarity depending on application. Control cables also make it possible to use a symmetrical positive-negative power supply for controlling positive and negative devices. The function of the laboratory power supplies for high voltages can be usually adjusted with accessories to permit special applications. The 0...10 V analog interface can be used to remote-control or expand the laboratory power supplies for high voltages from the LNC series.

Send your request now

Would you like to know more about power supplies from Heinzinger?

Reliable even in permanent operation

All laboratory power supplies for high voltages of the LNC series are permanently short-circuit-proof and can also be used in permanent operation. They can supply a continuous nominal current or nominal voltage. The 3 ½-digit digital display indicates the respective voltage and current control status separately. A separate 10-speed potentiometer makes it possible to set the voltage and current independently of each other. The laboratory power supplies for high voltages can be connected to inductive, resistive or capacitive loads equally. Matching 19" installation frames and connection cables are available as accessories for all devices of this series.

Contact us if your company needs laboratory power supplies for high voltages! We can advise you by phone at +49 8031 2458 0 or by email to info(at)heinzinger(dot)de

More high-voltage power supplies from Heinzinger

High voltage power supply up to 10,000 V
EVO-Series

High-voltage power supplies of the EVO series are the new generation of DC power supplies

EVO-Series
High voltage power supply with high output
PHN- & PHY-Series

The output is decisive for use in electron beam generation or X-ray tube setups

PHN- & PHY-Series
Universal high voltage power supply up to 300,000 V
PNC-Series

PNC, PNChp, PNC3p, PNCcap
Universal high-voltage power supplies up to 300,000 Volt with superb precision

PNC-Series